வேலை வாய்ப்பு

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description

We are looking for a skilled Mechanical Engineer to join our design engineering team in Singapore. The role will focus on the design, specification, and analysis of static and rotating mechanical equipment, ensuring compliance with codes, standards, and project requirements throughout the engineering and procurement lifecycle.

Responsibilities

• Perform design and analysis of static and rotating equipment.
• Prepare equipment datasheets, specifications, and technical requisitions.
• Review and comment on vendor drawings and technical documents.
• Coordinate with procurement and project teams to ensure technical compliance.
• Provide support during equipment installation, testing, and commissioning.
• Ensure designs meet project specifications, safety requirements, and industry codes.

Requirements

• Bachelor’s Degree in Mechanical Engineering.
• Minimum 5 years’ relevant experience in oil & gas or petrochemical projects.
• Familiarity with API, ASME, and other applicable codes.
• Strong technical and analytical skills with proficiency in engineering software.
• Good communication and coordination skills.

How to Apply
Interested candidates, please send your updated resume to phoenix@spemocean.com.
Kindly include the position title in the email subject line and state your current/expected salary and availability/notice period.

Responsibilities

1. Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, RTL and gate verification, synthesis script and silicon validation.
2. Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Requirements:

1. BS or MS degree in electrical engineering or equivalent with at least 2 years IC design experience
2. Familiar with digital ASIC/SOC design flow from RTL to silicon characterization
3. Knowledge of digital circuit design, embedded system design, verification, and product development lifecycle
4. Deep understanding of how RTL code impacts area, power, and operating frequency, as well as the requirements for timing, power, and area optimization in synthesis implementation, along with the associated script files such as SDC and UPF.
5. Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.
6. Familiar with UVM verification methodology.
7. Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.
8. Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Role:

Mechanical & Electrical Engineer

• Singapore Based (City Hall / Jurong West Site)
• 5 Days work per week (8.30am to 5.30pm)
• Working at office, M&E Department (City Hall area), at least 5 years’ experience, salary $4500 - $6100
• Working at Jurong West project site, at least 3 years’ experience, salary $3800 - $5400
• Bachelor's Degree in Mechanical / Electrical Engineering + At least 3-5 years in M&E services & Experience in Main Contractor or Sub contractor M&E Department
• Career Progression Opportunities

Job scope:

To coordinate with consultants/subcontractors on the shopdrawings/ samples/ method statement and keep all involved parties updated of the latest changes.

To attend project/technical meeting and resolve site issues with owner/consultants for the site progress to proceed smoothly.

To verify the work done on site is in accordance with the approved drawings/ specifications/ authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.

Conduct weekly M&E meeting with the M&E sub-contractors to ensure that their work is in proper sequence and ensure that the site supervisors are aware of the work sequence to avoid clashes of site activities.

To resolve site issues with consultants/subcontractor/supplier ASAP to minimise delay to the construction progress.

To ensure that the related documentations are updated and ready for ISO audit.

To cooperate with the safety department and carry out the assigned duties within the safety framework including permit to work.

To coordinate with consultants and contractors for combined services/equipment testing so that site is ready for authorities’ inspection.

#SCR-vicky-wee

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

1. Work closely with Design Engineer to develop Drawing -- Model for coordination and collaboration using Revit.
2. Ensure construction documents, parameters and information accuracy for BIM Model.
3. Adhere to BIM Execution Plan and BIM project workflow criteria.
4. Prepare shop drawings for approval.
5. Prepare drawings and 3D Model for construction, coordination and as built purposes.
6. Monitor and update the model as per site condition changes.
7. Able to import and integrate other 3D models from various softwares such as Sketchup, Rhino,etc.
8. Follow BIM standards, Deliverables and Level of Development (LOD) required in the project.
9. Creating and developing the Parametric Family as per the parameter depending on specialities of materials.
10. Should be able to adopt with other BIM Modelling tools required in the project.
11. In charge of the Clash Detection for A&S and reports.
12. Any other ad-hoc duties as assigned by the Management.

Job Requirements

• Minimum Diploma in Civil Engineering or equivalent.
• At least 5 years of hands on experience in BIM Modeling work.
• Able to multi-task, work independently, proactive with positive attitude.
• Good knowledge of Autodesk cad software and BIM software / tools. (Autodesk Revit & Tekla).
• Proficient in MS Office. (Words, Excel and PowerPoint)

Our esteemed client in the Construction industry is seeking a Quantity Surveyor to join their dynamic team:

• Employment Type: Permanent
• Position: Quantity Surveyor
• Location: Islandwide
• Working Hours: 5.5 days, Office Hours (WFH on Saturdays)
• Salary Package: Up to $6,500 + Bonus

Job Responsibilities:

• Provide comprehensive support to the commercial team in both pre-contract and post-contract phases of fast-track projects.
• Assist with tender preparation, including quantity measurement, Bills of Quantities (BOQ), cost summaries, and price comparisons for tender submissions.
• Assist with the accurate preparation of progress payment claims, variation orders (VO), and final accounts. Support the measurement and certification of subcontractor payments.
• Support project budgeting, cost control, and cash flow monitoring.
• Maintain meticulous documentation of all site events, variations, and correspondence to support claims.
• Collaborate with and support project and safety teams on all commercial and site safety initiatives.
• Ensure all activities comply with company safety policies and relevant workplace health and safety legislation.

Job Requirements:

• At least Diploma in Quantity Surveying, Construction Management, or a related field.
• Minimum 3 years of relevant quantity surveying experience within a main-con environment.
• Knowledgeable in construction costs, methods, and materials.
• Able to start immediately or in short notice.

Ready to apply? Here’s how:

• Click the APPLY button, or
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing.

Only shortlisted candidates will be notified.

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA).

Adelin Chong | EA Personnel Reg No.: R1875641

Intuit Recruitment Pte Ltd | EA License No.: 25C2793

[Job ID: 1021335]

Responsibilities:

• Create BIM content and production documents for BIM-assisted projects
• Perform QA/QC on modeller & consultants’ models to ensure alignment with VDC/IDD standards
• Produce BIM model deliverables for design, documentation, and fabrication purposes
• Prepare BIM documentations and shop drawings directly from models
• Interpret engineering drawings and update Consultant’s RFI to reflect design intent
• Liaise with project team for shop drawings production
• Create and update 3D families for project use
• Identify issues for BIM Engineer where discrepancies occur during design production
• Prepare models for clash detection coordination
• Share knowledge and technical information with team members
• Provide technical guidance and act as advisor to junior modellers
• Ensure compliance with workplace safety and health regulations, aiming for zero accidents
• Perform other ad-hoc duties as assigned

Requirements:

• Bachelor/Diploma in Electrical or Mechanical Engineering, or equivalent M&E work experience
• Proficient in Revit, Navisworks, AutoCAD, and MS Office
• Experience in 4D and 5D model creation
• Experience in infrastructure projects is an added advantage
• 4 years of full-time experience in BIM interfacing and coordination, preferably with A1 Main Contractors or Consultants

To apply, kindly send your updated resume to cv_edmund@goodjobcreations.com.sg

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Licence No.: 07C5771
EA Personnel Reg. No.: R24122504
EA Personnel Name: Edmund Ting Chao Siong
#SCR-edmund-ting

ALG is currently recruiting for a Planning Assistant, for our engineering client, to work at the west side of Singapore.

This is an exciting opportunity for a 2-year contract, with the opportunity to transition to a permanent role after a 3-month probation period!

Working Days: 5 Days (Monday - Friday)

Working Hours: 7.30am - 5.15pm

Job Responsibilities

• Monitor and generate sales for the division
• Plan production schedules to meet production schedules
• Plan material purchases to meet production schedules
• Raise PRs for direct materials for production
• Allocate explosive lots for production
• Create and maintain production orders for production tracking to meet delivery
• Monitor production output and material availability for production
• Keep traceability record whenever needed
• Maintain BOM and routing in SAP
• SAP Material Master - create materials, routings, work centres
• MES system administrator
• Ad-hoc task given by Manager/Senior

Job Requirements

• Higher NITEC or Diploma Grad are all welcome, in any field
• Candidates with proficient in Microsoft Office Excel are preferred

If you meet the above qualifications and are interested in this role, APPLY NOW!

Please note that only shortlisted candidates will be contacted.

EA License Number: 11C4379 | Registration Number: R23113794

Job description

Due to our expansion, we are looking to hire an engineer to join our team in supporting the smooth operation of robots in a hospital setting and supervise installation of cabling.

The key responsibilities include:

• Ensure continuous monitoring of AMR performance via the dashboard to guarantee smooth operation throughout the hospital.
• Respond promptly to any operational incidents or issues on the ground, ensuring minimal disruption.
• Serve as a key communication point between the project team and ground users, providing regular updates on the status of AMR operations.
• Document any issues or incidents in daily log files to ensure traceability and resolution.
• Work in rotating shifts (6 am - 3 pm or 12 pm - 9 pm), with occasional weekends and public holidays based on shift schedule requirements.
• Receive training on generating error logs using specific software tools.
• Be trained to operate and control AMR fleet tasks through dedicated software.
• Basic troubleshooting of the AMR robots.
• Support structured cabling installations.
• On site supervision and provide guidance to sub contractors.
• Following up with customers on updates to project status.

Requirements:

1.Ability to work in a fast-paced environment.

2.Strong problem-solving and communication skills.

3.Willingness to learn and work with cutting-edge robotics technology.

4.Flexible to work in shifts, including weekends and public holidays.

Job summaryAs a member of our operations team, you’ll play a pivotal role in ensuring the smooth and reliable performance of robots in the hospital.

• Role: Project Senior Sales Engineer / BD / Sales Manager x 2
• Industry: EPCM Firm [ SME ], Currently Expanding To Australia
• Mon-Fri 8.30AM to 5.30PM
• Office Near to Tuas Crescent MRT, Singapore
• Basic Range: $6,000 - $8,500 + Variable Incentive [ Sales Commission from Project Value ]
• Entitled to Yearly Variable Bonus

EPCM Company. (Engineering Design, Procurement, Construction, Management) It focuses on delivering integrated solutions for sectors such as power plants, petrochemical, pharmaceuticals, semiconductors, wastewater & water treatment.

[ Must Fulfill All Requirements ]

• Diploma or Bachelor’s degree in engineering or related field
• Minimum 5 - 10 years of related industry experience in project sales with a strong track record (able to bring in 5 - 10 million sales per year), preferable Maintenance Project for Pharmaceutical & Waste Water treatment industry
• Highly prefer someone with project sales experience in pharmaceutical and/or wastewater treatment industry and with clients' leads on hand.
• Hunter sales role in generating sales leads and bring in new project & clients for company。
• Farmer role is not suitable for this post.
• Must have Strong technical skills in engineering design, analysis, and testing.

Job Scopes:

• Main scope is to bring in new customers. clients and project to company. [ Preferable Maintenance Project for pharmaceutical and wastewater related industry ]
• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279