வேலை வாய்ப்பு

Role Purpose:

• Industrialize and deliver PCBA NPI under new "ExpressOPS" initiatives during product development to achieve manufacturability.
• Provide R&D with Design for Manufacturing / Assembly (DFM / DFA) inputs, perform feasibility studies on PCBA, review PCB layout and component specification, develop technical processes and tools, and establish BoM Structure to provide fast sample delivery.
• Participates in Technology projects and Continuous Improvement projects and acts as a technical authority on SMT process feasibility and innovation, ensuring seamless collaboration with R&D, Technology Development and production teams.

Major Responsibilities:

As part of the Industrial Engineering (IE) Team to deliver PCBA NPI under new ExpressOPS initiatives:

• To industrialize new PCBAs and transfer current PCBAs between locations according to company initiatives Product Engineering Process (PEP) and Production to Production (PTP)
• Responsible as a technical lead of End-to-End prototyping needs of PCBA

As the Subject Matter Expert, will be responsible for ensuring manufacturing feasibility study is done before accepting PCBAs for industrialization:

I) Technical Feasibility & Process Development

• Conduct early-stage technical feasibility assessments of new PCBAs in collaboration with R&D during product design
• Participate and execute the development and validation of new SMT processes and technologies (e.g., LGA, UFBGA, PoP, 0201/01005 components)
• Drive prototyping and pilot builds to evaluate and refine processes prior to volume ramp-up

II) Collaboration with R&D & PEP Projects

• Act as the process engineering counterpart for PCBAs in PEP (Product Engineering Process) projects from concept through industrialization
• Ensure robust Design for Manufacturing (DFM) input is integrated into PCB and assembly designs early in the development phase
• Provide SMT-specific guidance on PCB layout, component footprint design, solder joint reliability, and stencil design

III) Process Standardization & Optimization, collaboration with Technology Development (TD)

• Execute trials and qualifications for new solder pastes, fluxes, nozzles, reflow profiles, etc
• Execute and maintain SMT process standards, best practices, and design rules in TD projects
• Analyze process data to improve yield, cycle time, and equipment utilization
• Participate in continuous improvement projects leveraging Six Sigma, SPC, DOE, or Lean methodologies

IV) Technology Roadmapping & Innovation

• Monitor and evaluate emerging SMT technologies, materials, and equipment
• Identify opportunities for cost savings or capability expansion through new equipment or process enhancements

V) Cross-functional Support & Knowledge Sharing

• Collaborate with Maintenance + Service, Technology Development, Procurement and Quality to resolve technical challenges
• Train production and process engineers on new technologies and process changes
• Document and communicate lessons learned and technical know-how across global teams

You are responsible to provide R&D with DFM / DFA inputs, review component specifications and PCB layout to ensure PCBA are manufacturable with sustainable good quality:

• Participate actively in Risk Assessment (DFMEA & PFMEA) and Design of Experiments (DOE)
• Review, develop and setup BoM and product structure for new PCBA
• Provide PCBA manufacturing expertise to Business Unit and Production to meet time to market, quality and cost

You are responsible together with R&D industrialized PCBAs are passing through relevant laboratory and certification tests:

• Develop and implement quality acceptance methods for samples and prototypes with R&D

You are responsible for conceptualize, develop machines and fixtures, and release production processes and parameters in Manufacturing Technologies (SMT / THT / COB):

• Develop and optimize stencil designs, solder paste printing, pick & place programs, reflow profiles, and AOI/AXI strategies.
• Develop work instructions and methods for new PCBA
• Verify new component solderability, process window, zero point, and pad design
• Develop machine programs and qualifying new process parameters for various types of machines in SMT
• Troubleshoot production processes during actual build to achieve good quality for customer
• Drive root cause analysis and corrective actions for process-related issues

You are the Subject Matter Expert (PCBA), responsible for executing New Technology and Improvement Projects:

• Testing and implementing of new material, new tools and new machines (FAT/SAT) with Technology Development and R&D departments in Technology Project Work Packages
• Participate & implement Technology Work Packages at SEA regional level
• Analyze data, provide solutions for productivity improvement & structured problem solving

Requirements:

• Minimum a Bachelor’s Degree in Electronics / Mechatronics Engineering or equivalent education. Experience in PCBA Process development an added advantage
• Minimum 7 years of industry experience, with hands-on experience in industrialization and development of SMT, THT and COB assemblies during product development phase
• Industry experience and hands-on in: SMT technologies and setting up machine programs (Pick & Place, Stencil Development, Solder Paste Printing, Solder Paste Inspection, Reflow Soldering Profile Development, Glue Jetting, V-groove and Router Depaneling, Wave and Selective Soldering); COB technologies and setting up machine programs (Die Attach, Wire Bond, GlobTop); Soldering technologies and setting up machine programs (Wave Soldering, Selective Soldering, Reflow Soldering, Manual Soldering and Rework Soldering of electronic assemblies)
• Familiarity with IPC standards (IPC-A-610, J-STD-001, IPC 7711/7721)
• Strong knowledge of SMT equipment (e.g., DEK/MPM printers, Fuji/ASM/Panasonic placement machines, Heller/ERSA reflow ovens, AOI/AXI)t
• Possess good knowledge in FMEA, Control plan, APQP, DFSS, and using DOE and SPC to determine the interrelations of process parameters and processes results
• Possess good knowledge and hands-on expertise in any of this statistical data analysis software: Minitab, JMP or QS-stat software for process development is an advantage

Job Description

• Establish BIM Project Delivery for BIM Services such as BIM Implementation, BIM Consultation, and BIM Training. This would include BIM requirements, process, and workflow.
• Lead and manage the BIM Team to adopt BIM tools or other technologies in BIM Implementation Projects.
• Ongoing review of BIM Project Models, workflows, and methodologies to ensure timely delivery of project deliverables.
• Prepare, maintain, and update project BIM Execution Plan, meet project team consultants/ client/ authority to finalize project BIM Executive Plan, monitor the progress of project’s BIM program.
• Research, and promote BIM-related advanced technology towards integrated practice.
• Build up and develop the technical team for the company.
• Well-versed in new technologies. (VR/AR, Cloud, Web-based communication, construction management platform, etc.)

Requirements

• Degree in Electrical & Electronics / Mechanical / Mechatronics / Civil / Structural / Architectural Engineering or formally trained in BIM (Diploma or Modelling Training Certification) or Tier 2 DDM (Digital Delivery Management) accredited by Building Smart Singapore.
• At least four (4) years of engineering experience in BIM-based construction, design, drafting, coordination, drawing production, and submission to the local authority.
• Experience in large to mega large public projects, building and infrastructure projects in various regions e.g., Asia, Middle East, etc.
• Certification in BIM Management from BCA is preferred.
• Committed and responsible towards job
• Able to take ownership, proactive firm
• Strong leadership, coaching skills and organising abilities.
• Able to work independently.
• Office Location is at Neythal Road
• 5.5 work day

Responsibilities

• Ensures all construction activities are completed prior to taking up the system for commissioning.
• Prepares and plans the deployment of workers to fulfill the commissioning schedule.
• Ensures the preparation of procedures and guidelines for systematic commissioning and start-up of equipment.
• Initiate and manage the commissioning by Coordinating between the company and OEM.
• Highlight operational issues with regards to machinery and equipment.
• Ensure that OEM meets the Contractual agreement accordingly.
• Audit work site regularly and ensure that proper housekeeping is adhered to.
• Supervise onsite commissioning activities
• Coordinate work with other Trades
• Prepare and maintain commission records of site observations, testing processes and checklist.
• Track and review progress through HAT meetings.
• Attend progress meeting to keep up status and close issues with customers.
• Ensures that all safety and precautionary requirements and procedures are followed during the commissioning process.
• Compile and update commissioning report/ records.
• Assist with Identification and set right commissioning and malfunction issues.
• Access the requirements of special tools and equipment required for commissioning and initiate procurement if required.
• Review the tools and equipment used for Safety and Efficiency.
• Develop and update RA accordingly and enforce on-site and conducted weekly safety briefing with supervisors and workers

Requirements

• Degree or Diploma in Naval Architecture/Structural/Marine/Electrical/Electronic Engineering or other electrical/offshore/electronic related studies.
• Naval Institute Trained
• Shipboard or Preferably 3 years or more of working experiences in similar capacity.
• No experience can be considered for junior role.
• Knowledge of Class requirements & Quality Standard requirements
• Trade Dependent.
• Must be able to understand Marine/Electrical & Automation Systems Equipment related schematic & arrangement drawings
• Knowledge and skills in Marine/Electrical & Automation systems equipment's operational requirements.
• Adequate Computing Knowledge as well as use of Microsoft Office and e-mail.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Maintenance Technician

Basic Salary: $2,200 + OT

Working hour: Monday to Friday (8am - 5.15pm)

Working location: Gul Circle, Singapore (walking distance with MRT)

Job Descriptions:

• Ensure smooth supply of facility to production section.
• Maintain and ensure reliability of machines.
• Ensure the equipment are in good operating condition after inspection, service, repair and record in the related forms.
• Follow according to the maintenance schedule.
• Filing of all machine maintenance life history.
• Safety of machine for production and quality.
• Calibration of machines.
• Other general maintenance works.

Requirement:

• Relevant experience in maintenance job for at least 1 year.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

• Prepare documents for Tender and Contracts
• Tender Government Projects
• Prepare quotation, sourcing for quotations
• Assisting Project Team for Variation Works, Progress Claim and Cost
• Measuring of Quantity take off from drawings
• Carry out site valuation

Requirements

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent.

Good Pay + Good allowance + Good Bonus

• Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)

• Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Involve in meeting with customers related to ship defect & other related issues.
• To prepare service acceptances, reports upon completion of defect rectification.
• Involve in planning, scheduling & giving of jobs to production team daily.
• Able to provide suggestions/ideas to assist customers in solving problems
• Monitoring of jobs to ensure on time completion
• Ensuring compliance with appliance standards and with Occupational Health and Safety Act.
• Complying with service standards, work instructions and customers' requirements.
• Involves in project

Requirements:

• Degree in Mechanical or Marine Engineering
• Understanding of basic principles of air conditioning, refrigeration and heating will be an advantage.
• Possess positive attitude
• Possess basic understanding of basic components and functions of mechanical systems
• Able to read simple drawings and service reports
• Basic communication with customers.
• Good teamwork

Other Information:

• Location: Pioneer Sector (Daily Transportation Reimbursed To and Fro)
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:

The role involves monitoring and ensuring the quality of all electrical works, verifying compliance with project specifications, standards, and statutory requirements.

Key Responsibilities:

· Implement and manage quality control procedures for electrical works on site.

· Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

· Review and verify electrical shop drawings, material submissions, and method statements for compliance.

· Monitor workmanship to ensure alignment with project specifications and quality standards.

· Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

· Liaise with consultants, clients, and subcontractors to resolve quality-related issues.

· Maintain quality documentation, inspection records, and test reports.

· Support handover and commissioning by ensuring all electrical quality requirements are met.

Job Requirements:

• Degree/Diploma in Electrical Engineering or related discipline.
• Minimum 6–8 years of experience in quality control for electrical works in large-scale construction projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.
• Familiarity with relevant codes, regulations, and authority requirements in Singapore.
• Detail-oriented with strong analytical and problem-solving skills.
• Effective communication and coordination skills to work with multiple stakeholders.
• Experience in industrial or large infrastructure projects is an advantage.
• Willingness to work at Tuas with transportation pick up at designated MRT station.

Job Description & Requirements

Supervisors and general foremen in building and related trades supervise activities of a distinct unit at a construction site, control and coordinate the activities of workers who are engaged in various occupations.

Tasks include:

• Interpreting specifications and job orders
• Determining sequence of operations and use of equipment
• Estimating manpower requirements
• Assigning duties to workers
• Analysing and resolving work problems
• Coordinating the work of one or more units with other units
• Recommending or initiating personnel action
• Supervising co-workers and helping them in their work
• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work programme
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control site safety and neat
• Supervise ongoing site activities closely

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years’ local experience in LV/MV electrical equipment installation, testing, commissioning, or maintenance within the built environment sector.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong