வேலை வாய்ப்பு

• Lead and motivate line leaders and operators to achieve daily production targets and maintain quality standards.
• Conduct shift handovers and address operational or process issues promptly.
• Plan manpower, overtime, and consumable usage for smooth operations.
• Ensure strict adherence to manufacturing procedures and safety guidelines.
• Drive continuous improvement initiatives to enhance efficiency and reduce errors.

Requirements:

• Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines.
• At least 2 years of experience in high-tech/high-volume manufacturing environment.
• Strong leadership abilities with clear communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

As Marine Warranty Surveyor (Singapore), you will assist with providing marine warranty services to our clients in relation to a wide range of shipping and offshore operations and assist with mitigating the associated risks for their insurers.

Primarily based in Singapore, you will be an integral part of the Solis Marine team in Singapore, reporting directly to the Head of Marine Warranty Services. You will also be a member of the shipping team, providing support to colleagues in other geographical regions.

Duties and Responsibilities

The role is wide-ranging and leans on your expertise and experience in the field of marine warranty, including:

• Review of transportation documentation and procedures for a wide range of shipping and offshore operations including loading and sea fastening of project cargo, towage, transportation, offshore operations and installation of offshore structures.
• Attendance on site as marine warranty surveyor to verify compliance with approved plans and procedures, which will require both regional and international travel.
• Assisting the wider Solis Marine team with incident investigation, damage surveys and related services.
• Being proactive in marketing, developing the business and nurturing and maintaining client relationships.
• Willingness to work flexible hours during attendance on site to meet clients’ operational requirements.

Qualifications

• A higher diploma or degree in maritime studies or nautical sciences.
• STCW AII/2 certificate of competency (chief officer or master)
• Alternatively, a Bachelors or master’s degree in Naval Architecture, or,
• Other related qualification or similar practical work experience.
• Hold a valid medical certificate or seafarers medical (UK equivalent).
• You must have the physical ability and fitness levels to safely carry out the required surveys onboard vessels either at anchor or alongside in port facilities or offshore facilities and shipyards.

Experience

• Seagoing experience with a sound knowledge of shipboard operations and in particular a good understanding of cargo stowage and securing arrangements. Other similar experience working in port or terminal may also be considered.
• Preferably a minimum of 3 to 5 years’ experience working as a marine warranty surveyor or naval architect involved with marine transportation solutions or similar project management role.

About NexGen Wafer Systems

NexGen Wafer Systems provideshigh-end processing equipment for fast-growing niche applications in the semiconductor industry. Our products are in the global supply chain of emerging technologies. We are committed to providingsuperior value-adding solutions to ensure long-term success for our customers and our business by delivering uncompromising quality and innovation.

Poised for growth with a footprint on three continents, we are executing our mission to become an internationally branded high-tech equipment provider.

Are you ready for the next step in your career and interested in taking a important role in our organization?

What will you be doing?

Reporting to the company’s Customer Support Manager, you will work as the Support Engineer (Wet Clean Equipment) in Company’s Group HQ in Singapore.

Job Responsibilities:

1. Provide technical support for the installation, operation and start-up of new wet clean equipment.
2. Troubleshoot, repair and upgrade equipment hardware and software.
3. Participate in the development, design, and improvement of new equipment.
4. Provide maintenance and service of new equipment.
5. Assist the customer equipment department in training operators and writing equipment maintenance manuals.
6. Parts repair and engineering; legacy tool upgrade and retrofit
7. Create installation and service report

Technical Requirements:

1. Basic understanding of semiconductor wafer fab equipment and its major modules/components.
2. Experience in semiconductor equipment assembly, maintenance, and troubleshooting. Past working experience in wafer fab is an added advantage.
3. Basic knowledge in mechanical design (AutoCad, SolidWorks, or related software), electronic control system design experience, or knowledge of equipment design programming in industrial PLC/PC.
4. Experience in control system application software development is an added advantage.

Qualifications:

1. Diploma or higher in mechanical, electrical, electronics, mechatronics, automation, or related majors.
2. More than 3 years of relevant working experience in equipment maintenance and service, with at least 1 year of experience in the semiconductor electronics industry equipment maintenance and service.
3. Willing to travel regionally and internationally for extended period of time.
4. Proficient in mechanical or electrical equipment-related theory and hands-on.
5. Strong ability to analyze and solve machine related issues, with strong hands-on ability, sense of responsibility, and good communication and teamwork skills.
6. Ability to independently complete equipment maintenance and service work.
7. Good communication skills in English
8. Proficient in Microsoft Office Word & Excel.

What is it in for you?
You will join an international and motivated team dedicated to developing the next generation of semiconductor equipment. We are a fast-growing company with lots of space for you to develop your career within a high-tech environment. We provide excellent employment and remunerationconditions.

We look forward to hearing from you!
If the above mix of technical-, business- and personal challenges excites you, we encourage you to send us your details and apply for the position now!

We are looking for a talented Power Generation Field Service Technician to join our team based in Tuas, Singapore.

Diagnoses and completes less complex repairs to generators and components at the customer’s site.

Key Responsibilities:

• Engages customers in a courteous and professional manner.
• Anticipates and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete less complex repairs, including identifying and preparing required parts and tools.
• Performs preventative maintenance activities as per documented schedules and standards on power generation products in the field.
• Escalates unresolved issues to more experienced Field Service Technicians and/or Supervisor Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor

*Qualifications and Competencies

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Power Generation Systems Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; interprets and analyzes Power Generation system operation and integration (switch gear, power system controls, uninterruptable power supply, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Preferred Qualifications:

• Apprentice Certified Power Generation/ Electrical Technician (Preferred)
• Vocational diploma from relevant technical institution
• Current relevant electrical certification
• Locally valid driving permit
  This position may require licensing for compliance with export controls or sanctions regulations.
• Basic level field service work experience
• Intermediate level knowledge of and/or experience with of power generation products
• High Voltage/ Low Voltage experience
• Customer service experience
• Able to response for 7/24 emergency deployment
• Use Cummins software tool for troubleshooting
• Able to perform some mechanical work or work with a team to complete engine overhauling
• No cross-border relocation support provided.

Job Summary:

We are seeking a highly motivated and creative postdoctoral researcher to co-develop automation, AI-driven characterization and decision-making algorithms for self-driving laboratories which synthesize and test materials in the energy space. The position will be based in the Ceder research group at UC Berkeley, within the BEARS Consortium. The researcher will work in a highly collaborative environment as part of the AxCIS team in Singapore, interacting with experimental and modelling, and AI researchers, to innovate at the frontiers of materials design.

Duties & Responsibilities:

• Develop autonomous and robotic platforms for materials synthesis and characterization
• Develop innovative new approaches for materials testing in autonomous platforms.
• Perform software integration of new tools with A_lab OS software
• Analyze and present results in meetings or conferences
• Disseminate research outputs through high-impact publications, presentations, and data releases in accordance with open science practices.
• Manage project relations with sponsors and collaborators through reporting and visits.
• Collaborate with computational team members, including partners in academia, industry, and national laboratories.

Qualifications:

• Ph.D. in Materials Science, Mechanical Engineering, Robotics, Chemistry, Chemical Engineering, or a related field.
• Demonstrated experience in experimental materials research and/or automation
• Good publication record.
• Experience in hardware and software integration

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE (primarily on Advantest 93k - SmarTest 7, SmarTest 8 / Teradyne UFLEX)
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand oƯ, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering,Design Engineering, Quality Engineering, and Foundry Engineering teams.

Job Requirements:

• Graduates or Diploma/ Degree in Electronics / Electrical or Communication Engineering
• Minimum 5-8 years of working ATE knowledge on Advantest 93k or Uflex/Iflex
• Teradyne platform and experience in developing ATE SOC program from NPI stage to volume ramp stage
• Knowledge and hands on experience with statistical analysis software package and techniques, quality and reliability testing.
• Strong software skills (Java, C/C++, Visual Basic, Perl, Python etc.) for programming and debugging test codes
• Good Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.
• Very strong verbal and written communication skills and able to work independently

• 5 days work week
• Location: Across Singapore
• Industry: Electrical, Semiconductor, ACMV/Chiller & Industrial Valve
• Basic salary ranging $3k-$5k

Key Responsibilities:

1. Sales & Business Development

• Identify and develop new business opportunities through cold calling, networking, and market research.
• Manage and grow relationships with existing customers to achieve sales targets.
• Prepare and deliver technical presentations to demonstrate product capabilities and value proposition.

2. Technical Consultation

• Understand customer requirements and propose suitable technical solutions.
• Provide pre-sales and post-sales technical support, including troubleshooting and product application advice.
• Collaborate with the engineering team to develop customized solutions for clients.

3. Proposal & Quotation

• Prepare cost estimates, quotations, and tender submissions.
• Negotiate contract terms and close sales agreements in line with company policies.

4. Project Coordination

• Liaise between customers, suppliers, and internal departments to ensure timely delivery of solutions.
• Monitor project progress and address any issues to ensure customer satisfaction.

5. Market Intelligence

• Keep abreast of industry trends, competitor activities, and emerging technologies.
• Provide feedback to management on market needs and product improvements.

6. Administrative & Reporting

• Maintain accurate records of sales activities and pipeline in the CRM system.
• Prepare regular sales reports for management review.

Requirement:

• Diploma in Electrical, Mechanical, Mechatronics, or related technical field
• Preferably to have at least 1 years of sales engineering experience
• Candidate without experience is encouraged to apply too as there may have roles with training provided

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

- Generate process flow chart.

- PLC, HMI and robot program development, modularization, and standardization.

- Collaborate with mechanical and electrical team to determine process requirements.

- Conduct factory acceptance test and site acceptance test.

- Conduct internal and end-user operation and maintenance training.

- Update program development progress to department head.

- Create internal written knowledge transfer material.

- Create operation manual for machines designed.

- Ensure given tasks complete within given timeline.

- Provide technical support and solutions to sales inquiry.

- Generate proposal, costing and tender documents for sales inquiry.

- Liaise with suppliers on components selection and quotation.

- Liaise with customers on control design and process flow.

- Troubleshoot electrical design and software issues.

- Perform system maintenance and support for system in production.

Job Requirements:

- Minimum Diploma in Mechatronics, Electrical, Robotics Engineering or equivalent.

- Minimum 2 years of automation system PLC, HMI or industrial robot programming experience.

- Proficient in Omron Sysmac Studio and Microsoft Office.

- Familiar with industrial control protocols such as OPC UA, Ethernet/IP, Modbus TCP/IP, RFID interface will be added advantage.

- Proven ability to complete tasks given with minimum supervision.

- Capable to perform under tight schedule to meet project timeline.

Are you in your twenties looking for (Long - Term Career Opportunity & Travel Opportunities?)

FULL TIME ONLY ‍♂‍♀

NO EXPERIENCE NEEDED! ‍♂

Be a part of a FUN team & FUN working environment whereby growth is encouraged!

Job Responsibilities:

➡ Ensure customer satisfaction

➡ Engaging with people

➡ Contribute to positive working environment ‍♂

Job Requirements:

➡ Complete national service

➡ No experience required ‍♂

➡ Willing to learn

➡ Strong work ethics

Job Benefits:

➡ 1-1 training guidance

➡ Fun working environment

➡ Enriching development workshops

➡ Travelling opportunities ✈

➡ Career advancement

➡ Weekly payouts

Interested in a career opportunity? Apply now with your resume now!